| Item | Specification |
| Part Number | 354052 |
| Motor | 7-1/2 HP, 230/460V, 3 Ph, Prewired 230V |
| Number of Spindle speeds | 12 |
| Range of Spindle Speeds (RPM) | 42, 58, 86, 116, 154, 249, 304, 412, 554, 748,1098, 1458 |
| Spindle Taper | MT-5 |
| Quill Diameter (in.) | 3.78 |
| Max Distance Spindle to Table ( in.) | 30-1/2 |
| T-Slots Number and Size (in.) | 3 x 5/8 |
| Work Table Weight Capacity (lbs.) | 400 |
| Base Dimensions (LxWxH/ in.) | 114 x 33 x 54 |
| Drilling Capacity Cast Iron (in.) | 2-7/8 |
| Drilling Capacity Mild Steel (in.) | 2-3/4 |
| Tapping Capacity Cast Iron (in.) | 2-3/8 |
| Tapping Capacity Mild Steel (in.) | 2-1/8 |
| Quill Travel (in.) | 11 |
| Quill Travel w/ Powerfeed engaged (in.) | 11 |
| Quill Down feed Rates (IPR) | .002, .004, .006, .008, .014, .020 |
| Distance Base to Spindle (in.) | 51 |
| Table Size (in.) | 23-1/2 x 23-1/2 |
| Distance Column to Spindle (in.) | 16-1/2 |
| Drills to Center of Circle (in) | 33 |
| Spindle Distance to Base (in.) | 51 |
| Swing (in.) | 16-1/2 |
| Max Distance - Spindle to Table (in) | 30-1/2 |
| Spindle Travel (in.) | 11 |
| Auto | .002, .004, .006, .008, .014, .020 |
| Number of Powerfeeds | 6 |
| Base Slots Number & Size (in.) | 2 x 5/8 |
| Table Dimensions | 23-1/2 x 23-1/2 |
| Spindle Distance to Table (max./in.) | 30-1/2 |
| Spindle Distance to Table (min./in.) | 2-3/4 |
| Web Description | J-2380 33" Direct Drive Drill Press 7-1/2hp |
| Model Number | J-2380 |
| Height | 54 inch |
| Width | 33 inch |
| Length | 114 inch |
